Prime 1000 Watt Class-D Mono Amplifier R1000-1D

Prime 1000 Watt Class-D Mono Amplifier R1000-1D

The PRIME R1000-1D is a monstrous mono amplifier that can produce a Killowatt with unmatched efficiency into a 2-Ohm subwoofer load. The frequency response of the R1000-1D allows it to be used exclusively with subwoofers.

Read More
0 Reviews
Discontinued
Overview

The PRIME R1000-1D is a Class-D amplifier producing unreal power with unmatched efficiency. You simply cannot get a Kilowatt of power from a chassis this small using traditional Class-A/B amplifier designs. The Class-D topology inside the R1000-1D allows the amplifier to produce that much power with an amazing 90% efficiency! The 2-Ohm load mono stability and low frequency bandwidth makes this the perfect amplifier for running subwoofers.

FEATURES AT A GLANCE

  • 12dB/octave Butterworth crossover
  • MOSFET power supply
  • 4 Gauge power/ground connections with built-in ATC fusing
  • RCA pass-thru outputs
  • 1 Year Warranty
Technologies
Class-D

High efficiency amplifier design that reduces current consumption from the charging system.

Learn more
Specifications
Cta-2006 Compliant
Number of Channels
1
Total Power
(Sum of Rated Power)
1000 Watts RMS
Rated Power
(RMS Continuous Power)
500 Watts x 1 @ 4-Ohm
1000 Watts x 1 @ 2-Ohm
Dynamic Power
(PVC/PowerCube®)
1029 Watts
Bridgeable
No
Frequency Response
20Hz to 130Hz +/-1dB
Input Sensitivity
Circuit Topology Class
Class D
Efficiency (average)
90% @ 4-Ohm
89% @ 2-Ohm
Total Harmonic Distortion (Thd+Noise)
Signal Input
Low Level: 1 RCA pair
Signal Output
Low Level: 1 RCA pair
Tone Controls
Punch Bass: 0dB to +12dB @ 45Hz
Crossover Controls
Low Pass (LP): 40Hz-130Hz @ 12dB/octave Butterworth
Remote Controls
Punch Level Control
(when connected, is linked to "gain control" to provide remote output level)
Visual Indicators
Power
Protect
Power Wire Gauge
4 AWG
Power Input Connector
Screw terminal barrier strip
Speaker Wire Gauge
8 AWG
Speaker Output Connector
Screw terminal barrier strip
Cooling
Convection
Heatsink
Operating Voltage
Recommended Fuse
(Not Included)
Average Current Draw (13.8V Music)
Max. Current Draw (13.8V Sinewave)
Suggested Alternator
Included In The Box
Dimensions (H x W x D)
2.40 x 7.67 x 11.54 (in)
6.10 x 19.49 x 29.30 (cm)
Shipping Weight
7.4 Lbs.
(3.35 Kg.)
Compatibility
Support

Return Authorization

Contact the Authorized Rockford Fosgate Dealer you purchased this product from. If you need further assistance, call 1-800-669-9899 for Rockford Customer Service. You must obtain an RA# (Return Authorization number) to return any product to Rockford Fosgate. You are responsible for shipment of product to Rockford.


Accessories Wiring Wizard

Available Wiring Diagrams

Please consult your amplifier owner's manual for lowest recommended impedance.

The below diagrams optimize this amp for its lowest recommended MONO load.



Wiring Diagram #1



Wiring Diagram #2



Wiring Diagram #3



Wiring Diagram #4



Wiring Diagram #5



Wiring Diagram #6



Wiring Diagram #7



Wiring Diagram #8



Wiring Diagram #9



Wiring Diagram #10



Wiring Diagram #11

Speaker Polarity

Your woofer may use one of the following to identify (+/-) terminals.

Positive +

Red Post

Purple (4Ω)

Red (8Ω)

Negative -

Black Post

No Dot

No Dot

Speaker Polarity

Your woofer may use one of the following to identify (+/-) terminals.

Positive +

Red Post

Purple (4Ω)

Red (8Ω)

Negative -

Black Post

No Dot

No Dot

Reviews

Be the first to review this product.

No reviews yet

0 Reviews
Write a Review

Be first to hear about the latest products.

Sign up for product updates.