600 Watt Class-bd Mono Amplifier P6001bd

600 Watt Class-bd Mono Amplifier P6001bd

Efficiency is the name of the game when you’re selecting an amplifier for power hungry subwoofers. With it’s super efficient BD class design, the P6001bd assures maximum bang for your buck. A fantastic amplifier choice for a 4-ohm DVC subwoofer or a pair of 4-ohm SVC subwoofers.

Read More
0 Reviews
Discontinued
Overview

Efficiency is the name of the game when you’re selecting an amplifier for power hungry subwoofers. With it’s super efficient BD class design, the P6001bd assures maximum bang for your buck. A fantastic amplifier choice for a 4-ohm DVC subwoofer or a pair of 4-ohm SVC subwoofers.

FEATURES AT A GLANCE

  • Stealth Connections
  • Connector Cover
  • RF Logo with Interactive Signal Display
  • Focused mass heat sink allows critical aluminum material to be located around hottest internal devices
  • 4 Gauge power/ground connections with built-in ATC fusing
  • Thermal Sensing
  • Aux Ouputs
  • Infrasonic filter
  • 1 Year Warranty
Technologies
Class-BD

Class-BD amplifiers have 75-80% efficiency ratings vs. 20-60% efficiency ratings of traditional Class-A/B amplifiers.

Learn more
MEHSA

Rockford Fosgate amps use MEHSA, a thermal substrate that maximizes heat transfer between MOSFET power devices ...

Learn more
Engineered In The USA

These Avatars are a personal signature from the Rockford Fosgate team member(s) who designed and engineered ...

Learn more
Balanced Differential Inputs

Differential inputs eliminate noise picked up by signal cables.

Learn more
NOMAD

NOMAD is a "real time" analog computer that protects your amplifier from shorting speaker wires and ...

Learn more
TO-247 MOSFETs

(left-OLD | right-NEW)
Rockford Fosgate amps use custom TO-247 MOSFETs. These have 60% more ...

Learn more
Punch Bass EQ

Onboard equalizer with up to +18dB @ 45Hz.

Learn more
Specifications
Cta-2006 Compliant
Number of Channels
1
Total Power
(Sum of Rated Power)
600 Watts RMS
Rated Power
(RMS Continuous Power)
300 Watts x 1 @ 4-Ohm
600 Watts x 1 @ 2-Ohm
Dynamic Power
(Pvc/Powercube®)
Bridgeable
No
Frequency Response
20Hz to 20kHz +/- 0.5 dB
Input Sensitivity
Circuit Topology Class
Class BD
Efficiency (Average)
Total Harmonic Distortion (Thd+Noise)
Signal Input
Low level: 1 RCA pair
Signal Output
Low level: 1 RCA pair
Tone Controls
Bass: 0dB to +18dB @ 45Hz
Crossover Controls
Low-Pass (LP): 35-250Hz 12dB/octave Butterworth
Infrasonic Filter: on/off selectable, 12dB/octave, -3dB @ 28Hz
Remote Controls
Punch Bass EQ (included with cable)
Visual Indicators
Power On
Signal Level
Thermal Status
Speaker Protection
Power Wire Gauge
4 AWG
Power Input Connector
Block
Speaker Wire Gauge
8 AWG to 18 AWG
Speaker Output Connector
Screw terminal barrier strip
Cooling
Convection
Heatsink
Operating Voltage
Recommended Fuse
(Not Included)
Average Current Draw (13.8V Music)
Max. Current Draw (13.8V Sinewave)
Suggested Alternator
Included In The Box
Dimensions (H x W x D)
2.4 x 11 x 13.7 (in)
6.1 x 27.9 x 34.8 (cm)
Shipping Weight
13.5 Lbs.
(6.1 Kg.)
Compatibility
Support

Return Authorization

Contact the Authorized Rockford Fosgate Dealer you purchased this product from. If you need further assistance, call 1-800-669-9899 for Rockford Customer Service. You must obtain an RA# (Return Authorization number) to return any product to Rockford Fosgate. You are responsible for shipment of product to Rockford.


Accessories Wiring Wizard

Available Wiring Diagrams

Please consult your amplifier owner's manual for lowest recommended impedance.

The below diagrams optimize this amp for its lowest recommended MONO load.



Wiring Diagram #1



Wiring Diagram #2



Wiring Diagram #3



Wiring Diagram #4



Wiring Diagram #5



Wiring Diagram #6



Wiring Diagram #7



Wiring Diagram #8



Wiring Diagram #9



Wiring Diagram #10



Wiring Diagram #11

Speaker Polarity

Your woofer may use one of the following to identify (+/-) terminals.

Positive +

Red Post

Purple (4Ω)

Red (8Ω)

Negative -

Black Post

No Dot

No Dot

Speaker Polarity

Your woofer may use one of the following to identify (+/-) terminals.

Positive +

Red Post

Purple (4Ω)

Red (8Ω)

Negative -

Black Post

No Dot

No Dot

Reviews

Be the first to review this product.

No reviews yet

0 Reviews
Write a Review

Be first to hear about the latest products.

Sign up for product updates.