Punch 400 Watt Mono Amplifier P400X1

P400X1_1
P400X1_2
P400X1_3
P400X1_8
P400X1_5
P400X1_6
P400X1_7
P400X1_4

Punch 400 Watt Mono Amplifier P400X1

The Punch P400X1 is a mono amplifier capable of producing 400 Watts into a 2-Ohm load and is designed for medium to high-powered subwoofer applications. You can also use the P400X1 for multi-speaker center channel applications.

Read More
0 Reviews
Discontinued
Overview

The Punch P400X1 mono amplifier is specifically designed for medium to high-powered subwoofer applications. It's variable crossover and built-in Punch EQ allow for precise tuning of Bass frequencies, and its 2-Ohm mono stability is perfect for running up to four 4-Ohm DVC subwoofers. You can also add-on the PLC2 Remote Punch Level Control to control equalization from under the dash or center console. Sized to fit under any seat, you can hide this amplifier and have them guessing where the amp is.

FEATURES AT A GLANCE

  • High level input capable with Auto Turn-On circuit
  • 12dB/octave Butterworth crossover
  • Features C.L.E.A.N. Set-up
  • Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
  • RCA pass-thru outputs
  • On-board Punch EQ with +18dB boost @ 45Hz
  • Cast aluminum heatsink
  • Muted turn on
  • Stealth top mounted control panel
  • Short circuit protection
  • Over current protection
  • 1 Year Warranty
Technologies
CE Compliant

This product fulfills all essential safety and environmental requirements as defined in the European Directives (768/2008 ...

Learn more
CTA-2006 Compliant

Power ratings on Rockford Fosgate amplifiers conform to CTA-2006 industry standards. These guidelines mean your amplifier's ...

Learn more
TRANS•ana

Trans•ana is a Class A/B topology that simplifies the signal path of the amplifier allowing the ...

Learn more
Balanced Differential Inputs

Differential inputs eliminate noise picked up by signal cables.

Learn more
DTM

Dynamic Thermal Management evenly distributes excess heat across entire amplifier heatsink.

Learn more
DSM

DSM utilize 1% tight-tolerances improving efficiency of the circuit, decreases cross-talk from other discrete components and ...

Learn more
MEHSA3

MEHSA3 reduces MOSFET temperatures, lowers distortion, increases durability and prolongs the output device life span.

Learn more
NOMAD

NOMAD is a "real time" analog computer that protects your amplifier from shorting speaker wires and ...

Learn more
Engineered In The USA

These Avatars are a personal signature from the Rockford Fosgate team member(s) who designed and engineered ...

Learn more
C.L.E.A.N. Set-Up

C.L.E.A.N. (Calibrated Level Eliminates Audible Noise) is a patented circuit with in/out clip LEDs to help ...

Learn more
Specifications
Cta-2006 Compliant
Number of Channels
1
Total Power
(Sum of Rated Power)
400 Watts
Rated Power
(RMS Continuous Power)
250 Watts x 1 @ 4-Ohm
400 Watts x 1 @ 2-Ohm
Dynamic Power
(PVC/PowerCube®)
327 Watts x 1 @ 4-Ohms 0° Res
563 Watts x 1 @ 2-Ohms 0° Res
Bridgeable
No
Frequency Response
20Hz to 20kHz +/- 1.0dB
Input Sensitivity
150 mV - 12 V
Circuit Topology Class
Class A/B
Efficiency (average)
73% @ 4-Ohm
Total Harmonic Distortion (THD+Noise)
4-Ohm: <1.0%
2-Ohm: <1.0%
Signal Input
Hi/Low level: 1 RCA pair
Signal Output
Low Level: 1 RCA Pair
Tone Controls
Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
Punch EQ2 Treble: 0dB to +12dB @ 12.5kHz
Function depends upon LP/AP/HP switch position
Crossover Controls
High-Pass (HP): 50Hz-250Hz @ 12dB/octave Butterworth
Low-Pass (LP): 50-250Hz 12dB/octave Butterworth
All-Pass: Yes
Remote Controls
Optional Punch Level Control (PLC2) Ready
Visual Indicators
Power/Protect/Thermal LED
Input Clip LED3
Output Clip LED1,2,3

LED Color Legend:
1BLUE: <0.5% THD
2VIOLET: 1% THD
3RED: 10%+ THD
Power Wire Gauge
8 AWG to 4 AWG
Power Input Connector
Captive C-Clamp
Speaker Wire Gauge
8 AWG to 18 AWG
Speaker Output Connector
Captive C-Clamp
Cooling
Convection
Heatsink
Operating Voltage
9 - 16 VDC
Recommended Fuse
(not included)
60 A
Average Current Draw (13.8V Music)
30 A
Max. Current Draw (13.8V Sinewave)
60 A
Suggested Alternator
75 A
Included In The Box
Dimensions (H x W x D)
2.38 x 7.76 x 9.86 (in)
6.05 x 19.71 x 25.04 (cm)
Shipping Weight
9.5 Lbs. (4.30 Kg.)
Compatibility
Support

Return Authorization

Contact the Authorized Rockford Fosgate Dealer you purchased this product from. If you need further assistance, call 1-800-669-9899 for Rockford Customer Service. You must obtain an RA# (Return Authorization number) to return any product to Rockford Fosgate. You are responsible for shipment of product to Rockford.


Accessories Wiring Wizard

Available Wiring Diagrams

Please consult your amplifier owner's manual for lowest recommended impedance.

The below diagrams optimize this amp for its lowest recommended MONO load.



Wiring Diagram #1



Wiring Diagram #2



Wiring Diagram #3



Wiring Diagram #4



Wiring Diagram #5



Wiring Diagram #6



Wiring Diagram #7



Wiring Diagram #8



Wiring Diagram #9



Wiring Diagram #10



Wiring Diagram #11

Speaker Polarity

Your woofer may use one of the following to identify (+/-) terminals.

Positive +

Red Post

Purple (4Ω)

Red (8Ω)

Negative -

Black Post

No Dot

No Dot

Speaker Polarity

Your woofer may use one of the following to identify (+/-) terminals.

Positive +

Red Post

Purple (4Ω)

Red (8Ω)

Negative -

Black Post

No Dot

No Dot

Reviews

Be the first to review this product.

No reviews yet

0 Reviews
Write a Review

Be first to hear about the latest products.

Sign up for product updates.