UTV Accessories

This replacement T bracket attaches a standard enclosed speaker to a boat's wake tower clamp.  The replacement bracket is not supplied with hardware, so it's important to retain the existing screws and washers to be reused during installation. The replacement bracket is sold as an individual unit (not in pairs), ...

Single replacement Element Ready™ grille for the 2018+ Polaris Ranger Stage-1 audio system. The grille is designed to fit the TMS5 speaker equipped on the RNGR18-STG1 system. See COMPATIBILITY chart to verify fitment before purchasing.

This replacement subwoofer is designed for Harley-Davidson and Can-Am subwoofer systems.  This model is a "deconstructed" subwoofer equivalent to the M1D2-10B Marine M1 model, but without RGB illumination.  It's designed for high performance bass output in small sealed enclosures and features a 2Ω dual voice coil wired in series to ...

The MX-CAM is a universal camera, purpose-built for motorsports applications, making it a perfect add-on for Stage-5 and Stage-6 Color Optix™ kits. The high-resolution color camera provides a crystal-clear picture for backing-up or rock-crawling.  When paired with a vehicle specific installation kit, the T-harness allows for easy, error proof connections ...

The MX-CAM-RNGR18 is a vehicle specific installation kit for the MX-CAM, purpose-built for select Polaris ® RANGER® models. The included brackets allow for upper or lower factory fitment on 2018 and newer models. The included T-harness allows for easy, error proof electrical connections. The harness plugs directly into PMX-3 and ...

The MX-CAM-RZR14 is a vehicle specific installation kit for the MX-CAM, purpose-built for select Polaris® RZR® models. The included T-harness allows for easy, error proof electrical connections. An included hole saw allows for fitment on RZR® 2014 – 2018 models, allowing for direct fitment on 2019 and newer models. The ...

The MX-CAM-X317 is a vehicle specific installation kit for the MX-CAM, purpose-built for select Can-Am® MAVERICK X3® models. An included bracket allows for factory fitment on 2017 and newer models. The included T-harness allows for easy, error proof electrical connections. The harness plugs directly into PMX-3 and PMX-8 source units ...

System features a plug and play design, does not require any cutting or drilling of vehicle, step by step install videos available.

The PM-CL2B is a black marine grade cast aluminum wakeboard tower speaker clamp designed for use with the PM2652W-MB and RM1652W-MB. Please check COMPATIBILITY tab before purchasing.

The PM-CL3B is a black marine grade cast aluminum speaker clamp designed specifically for use with the PM2652W-MB and RM1652W-MB enclosed speakers on a Polaris Lock & Ride® roll cage used on RANGER and GENERAL.

The PMX-ANT is a powered antenna designed to boost AM/FM and WB (weather band) stations.  It's universal connectivity allows for use in Marine or UTV installation through a quick power connector.

The PMX-BTUR is a universal Bluetooth® remote control designed for use with any audio system that utilizes a mobile device (phone) as a source having Bluetooth® connectivity. Remote control allows user to adjust Volume, Track, Play, and Pause on Android® or Apple® mobile devices. The Bluetooth® 4.0 Smart Ready receiver ...

The PMX-USBP connects to any Rockford Fosgate PMX source unit equipped with a USB input jack and is Element Ready™ for protection against environmental contaminants. The stainless steel USB connections at both ends ensures it remains corrosion free, and the spring-loaded door is IP67 certified to keep access to the ...

The PMX16C is a 16-foot extension cable for the PMX-1R or PMX-0R.

The PMXYC Y-adaptor allows installation of two remote controls with one source unit.

The RFBTRCA universal Bluetooth™ adapter allows to wirelessly stream media (music library, Pandora, Rhapsody, etc) from a Bluetooth™ enabled device through stereo RCA output jacks. Auxiliary input powered by the vehicle’s 12V accessory socket. Easy 1-button pairing function binds to Bluetooth™ enabled device and chimes on subsequent connections. Supplied 1/8” ...

Speaker enclosure for select Polaris® GENERAL models.

Front subwoofer enclosure for select Rockford Fosgate 10" subwoofers with mounting bracket.

Amp wiring harness for select Polaris GENERAL™ models.

This kit is included in the GNRL-STAGE1, GNRL-STAGE2, GNRL-STAGE3, and GNRL-STAGE4 complete system kits.  This dash kit is only available separately when bundled with the PMX-0, PMX-2, or PMX-3 digital marine source units.

Rear speaker harness for adding PM2652W-MB or RM1652W-MB. NOTE: Speakers also require PM-CL3B bracket kit.

The Ride Command® audio interface (RFPOL-RC34) is designed to connect Rockford Fosgate amplifiers with a factory Polaris® Ride Command® source unit. The two-part harness taps both front and subwoofer audio signals from Ride Command®, actively filters any electronic noise caused by the DYNAMIX suspension system and feed them to a TM400X4ad ...

The Ride Command® audio interface (RFPOL-RC5) is designed to connect Rockford Fosgate amplifiers with a factory Polaris® Ride Command® source unit. The two-part harness taps both front, rear and subwoofer audio signals from Ride Command®, actively filters any electronic noise caused by the DYNAMIX suspension system and feeds them to ...

Front speaker enclosures built for select Polaris® RANGER models.

Subwoofer enclosure for select Polaris® RANGER models.

Amp kit mounting plate for select RANGER® models.

This kit is included in the RNGR-STAGE1, RNGR-STAGE2, RNGR-STAGE3, and RNGR-STAGE4 complete system kits.  This dash kit is only available separately when bundled with the PMX-0, PMX-2, or PMX-3 digital marine source units.

Rear speaker harness, when adding PM2652W-MB or RM1652W-MB. Requires RFRNGR-K8 complete wire kit for installation. Mini wake speakers require PM-CL3B bracket.

Fiber Reinforced composite blend universal 10” subwoofer enclosure designed to be a direct fit for select RZR model vehicles. Designed to be used with Prime RM series 10" woofers, Punch PM series 10" woofer and T1 Slim series 10" woofers. Kit includes all needed hardware for the installation.

Front lower speaker enclosure for select Yamaha® YXZ models.

Subwoofer enclosure for select Yamaha® YXZ models.

Amp kit and mounting plate for select YXZ® models.

This kit is included in the YXZ-STAGE1, YXZ-STAGE2, YXZ-STAGE3, YXZ-STAGE4, and YXZ-STAGE5 complete system kits.  This dash kit is only available separately when bundled with the PMX-0, PMX-2, or PMX-3 digital marine source units.

Rear speaker harness for select YXZ® models.

Rockford Fosgate audio systems for select 2018+ RANGER models are 100% Element Ready™, providing the ability to take your off-road vehicle into any environment. The system features a plug and play design, requires minimal drilling for some components, and includes step-by-step installation videos.

Rockford Fosgate audio systems for select 2018+ RANGER models are 100% Element Ready™, providing the ability to take your off-road vehicle into any environment. The system features a plug and play design, requires minimal drilling for some components, and includes step-by-step installation videos.

Rockford Fosgate audio systems for select 2018+ RANGER models are 100% Element Ready™, providing the ability to take your off-road vehicle into any environment. The system features a plug and play design, requires minimal drilling for some components, and includes step-by-step installation videos.  NOTE: This bundle is provided as a ...

Rockford Fosgate audio systems for select 2018+ RANGER models are 100% Element Ready™, providing the ability to take your off-road vehicle into any environment. The system features a plug and play design, requires minimal drilling for some components, and includes step-by-step installation videos.

Rockford Fosgate audio systems for select 2018+ RANGER models are 100% Element Ready™, providing the ability to take your off-road vehicle into any environment. The system features a plug and play design, requires minimal drilling for some components, and includes step-by-step installation videos.

Rockford Fosgate audio systems for select 2018+ RANGER models are 100% Element Ready™, providing the ability to take your off-road vehicle into any environment. The system features a plug and play design, requires minimal drilling for some components, and includes step-by-step installation videos.

System features a plug and play design, does not require any cutting or drilling of vehicle, step by step install videos available.

System features a plug and play design, does not require any cutting or drilling of vehicle, step by step install videos available.

System features a plug and play design, does not require any cutting or drilling of vehicle, step by step install videos available.

System features a plug and play design, does not require any cutting or drilling of vehicle, step by step install videos available.

3rd generation subwoofer enclosure for select Maverick X3. Fits under front driver or front passenger seats with complete up-and-down travel of seat adjustment. Due to restricted view location underneath seat, Color Optix™ control is not applicable on this subwoofer enclosure system.