CAR AUDIO ACCESSORIES

Detachable speaker output plug with connections for Positive (+) and Negative (-). Secures bare wire using screw and captive compression clamp. For use with select 2011 and newer compact PUNCH and POWER amplifiers.

Detachable power plug with connections for Battery (B+), Ground (G), and Remote Turn-On (REM). Secures bare wire using screw and captive compression clamp. For use with select 2012 and newer compact PUNCH amplifiers.

4-pin to bare wire speaker output replacement harness. For use with select compact PUNCH and POWER series amplifiers

Front channel low-level RCA to 4-pin input replacement harness. Can also be used as a high-level input harness by cutting off the RCA input jacks. For use with select compact PUNCH and POWER series amplifiers

Front channel 4-pin to bare wire speaker output replacement harness. For use with select compact PUNCH and POWER series amplifiers

T-Harness for installing the Maestro AR or DSR1 into select Chrysler, Dodge, Fiat, Jeep and Ram vehicles.

T-harness for select Chrysler vehicles with select audio systems

T-harness for select Chrysler vehicles with select audio systems.

Extension harness to relocate DSR1 to a location different than where the factory amplifier is located. Length is 2-meters (6.5 feet).

T-Harness for 2015+ Ford Mustang Vehicles.

T-Harness for installing the Maestro AR or DSR1 into select Lexus and Toyota vehicles.

T-Harness for installing the Maestro AR or DSR1 into select Lexus, Subaru and Toyota vehicles.

T-Harness for installing the Maestro AR or DSR1 into select Subaru and Toyota vehicles.

DSP installation T-harness for select Chrysler, Dodge, Fiat, Jeep and Ram vehicles 2013 and up without factory amplifiers. Greatly simplifies the installation of the DSR1 and aftermarket amplifier sold separately.

DSP installation T-harness for select Inifiniti, Nissan and Subaru vehicles without factory amplifiers. Greatly simplifies the installation of the DSR1 and aftermarket amplifier sold separately.

T-Harness for select Scion, Subaru and Toyota vehicles without factory amplifiers. Greatly simplifies the addition of the DSR1 and amplifiers. HRN-DSP-TO1

Punch Bass remote EQ with 0dB to +18dB bass boost at 45Hz. Cable and mounting hardware included. For use with 2004-2006 PUNCH amplifiers.

This remote Punch EQ offers 0dB to +18dB boost @ 45Hz and/or a hinge treble boost 0dB to +12dB @ 12kHz. Cable and mounting hardware included. For use with select 2007 and newer PUNCH & POWER amplifiers.

The PLC-U is designed as an inline, universal audio level control that can be integrated into almost any audio system. It is intended to allow you to vary the signal level of any stereo pair of RCA cables in the event you do not have a master volume control or ...

Remote Level Control offers remote level control of the amplifier. Once the on-board gain control is set, the PLC2 can attenuate (and not increase) the level from that point. Cable and mounting hardware included. For use with select 2013 and newer PUNCH and POWER amplifiers (see compatibility chart)

140 amp circuit breaker 1/0 AWG/4 AWG inputs.

200 amp circuit breaker 1/0 AWG/4 AWG inputs.

Distribution block, platinum finish. (1) 1/0 AWG -or- 4 AWG input. (3) 4 AWG -or- 8 AWG outputs. Uses removable interior adapter rings to adjust wire gauge size.

Platinum plated battery terminals allowing for both a positive or negative connection utilizing the supplied sizing ring. Terminals allow for multiple wire size inputs. Positive/Negative battery terminal, platinum finish. (2) 4 AWG/8 AWG inputs.

Platinum plated, available in LONG for GM vehicles with dual power connectors. Allows for additional power or ground connections.

2 Pack, platinum finish.

2 Pack, platinum finish.

2 Pack, platinum finish.

Platinum plated fuse holder, flexibility of multiple wire size inputs. Inline ANL or Maxi fuse holder, platinum finish. Accepts 1/0 AWG or 4 AWG wire.

Platinum plated AGU style fused distribution, flexibility of multiple wire size inputs and outputs. Allows for 2 AGU style fuses. Accept 1/0 AWG and 4 AWG inputs. (2) 4 AWG/8 AWG outputs.

2 Pack, platinum finish.

2 Pack, platinum finish.

Inline MAXI fuse holder with platinum finish. Accepts 4 AWG or 8 AWG wire.

4 Pack, Platinum Finish

Twisted pair design for noise rejection, split center pin for a secure connection, frosted outer sheild for durability and flexibility.

Twisted pair design for noise rejection, split center pin for a secure connection, frosted outer sheild for durability and flexibility.

Twisted pair design for noise rejection, split center pin for a secure connection, frosted outer sheild for durability and flexibility.

Twisted pair design for noise rejection, split center pin for a secure connection, frosted outer sheild for durability and flexibility.

This high level speaker wire to RCA adaptor is an economic way to connect a factory OEM source unit to an amplifier. Please refer to installation instructions to prevent possible damage to source unit.

Dual twist design for excellent noise rejection, 6-cut connector and split center pin for a secure connection, woven outer sheild for durability.

Dual twist design for excellent noise rejection, 6-cut connector and split center pin for a secure connection, woven outer sheild for durability.

Dual twist design for excellent noise rejection, 6-cut connector and split center pin for a secure connection, woven outer shield for durability.

Dual twist design for excellent noise rejection, 6-cut connector and split center pin for a secure connection, woven outer sheild for durability.

Twisted pair design for noise rejection, split center pin for a secure connection, frosted outer sheild for durability and flexibility.

Kit includes 17 feet of 10 AWG power wire, 3 feet of 10 AWG ground wire, ATC fuse holder and fuse, 20 feet of remote wire, 25 Amp fuse.

17 feet of 1/0 AWG power wire
3 feet of 1/0 AWG ground wire
4 feet of 4 AWG power wire
4 feet of 4 AWG ground wire
ANL/MAXI fuse holder and fuse
30 feet of 16 AWG speaker wire
(3) 16 feet twisted pair RCAs
(2) 4 AWG distribution ...

Kit includes 17 feet of 4 AWG power wire, 3 feet of 4 AWG ground wire, Maxi fuse holder and fuse, 100 Amp fuse.

Kit includes 17 feet of 4 AWG power wire, 3 feet of 4 AWG ground wire, (1) 16 feet twisted pair RCA, Maxi fuse holder and fuse, 20 feet of remote wire, 100 Amp fuse.

Kit includes 17 feet of 4 AWG power wire, 3 feet of 4 AWG ground wire, 30 feet of 16 AWG speaker wire, (1) 16 feet twisted pair RCA, Maxi fuse holder and fuse, 20 feet of remote wire, 100 Amp fuse.

Kit includes 17 feet of 8 AWG power wire, 3 feet of 8 AWG ground wire, AGU fuse holder and fuse, 20 feet of remote wire, 40 Amp fuse.

Kit includes 17 feet of 8 AWG power wire, 3 feet of 8 AWG ground wire, (1) 16 feet twisted pair RCA, AGU fuse holder and fuse, 20 feet of remote wire, 40 Amp fuse.

Kit includes 17 feet of 8 AWG power wire, 3 foot of 8 AWG ground wire, 30 feet of 16 AWG speaker wire, (1) 16 feet twisted pair RCA, AGU fuse holder and fuse, 20 feet of remote wire, 40 Amp fuse.

4 AWG set screw ring terminal with 8.15 mm diameter hole. Platinum finish, 4 pack.

4 AWG seamed crimp style barrier spade (FORK), platinum finish, 4 pack.

1 AWG seamed crimp style ring terminal, platinum finish, 2 pack.

4 AWG seamed crimp style ring terminal, platinum finish, 4 pack.

Full AWG (American Wire Guage) Specification. Frosted outer jacked for maximum flexibility.

Full AWG (American Wire Guage) Specification. Frosted outer jacked for maximum flexibility.

Full AWG (American Wire Guage) Specification. Frosted outer jacked for maximum flexibility.

Full AWG (American Wire Guage) Specification. Frosted outer jacked for maximum flexibility.

Full AWG (American Wire Guage) Specification. Frosted outer jacked for maximum flexibility.

Full AWG (American Wire Guage) Specification. Frosted outer jacked for maximum flexibility.

Full AWG (American Wire Guage) Specification. Frosted outer jacked for maximum flexibility.

Full AWG (American Wire Guage) Specification. Frosted outer jacked for maximum flexibility.