Power 600 Watt 4-Channel Amplifier T600-4
Power 600 Watt 4-Channel Amplifier T600-4
The Power T600-4 is a 4-channel amplifier capable of producing 150 Watts into each of its four channels at 2-Ohms. The T600-4 can run a 4-way full-range system or use component speakers on the front with subwoofers on the rear.
Notify Me When Back In Stock:
The T600-4 amplifier offers the perfect balance of power output and compact design required for high performance audio systems. The 4-channel configuration allows fine tuning adjustments between front stage component systems and rear surround speakers. The built-in crossover also allows the rear channels to be configured for running one or two subwoofers.
FEATURES AT A GLANCE
- MOSFET output stage
- 4 Gauge power/ground connectors
- 2/4 channel input switch
- 24dB/octave crossover
- Audiophile grade speaker connections
- MOSFET power supply
- RCA pass-thru outputs
- 2-Year Warranty
Trans•ana is a Class A/B topology that simplifies the signal path of the amplifier allowing the ...
Learn more
TRANS•ana
Trans•ana is a Class A/B topology that simplifies the signal path of the amplifier allowing the signal to travel through the amplifier at a lower voltage. The result is greater reliability and exceptional sound quality.
Dynamic Thermal Management evenly distributes excess heat across entire amplifier heatsink.
Learn more
DTM
Dynamic Thermal Management evenly distributes excess heat across entire amplifier heatsink.
Punch EQ2
Onboard equalizer with up to +18dB @ 45Hz and/or up to +12dB boost at 12kHz.
MEHSA3 reduces MOSFET temperatures, lowers distortion, increases durability and prolongs the output device life span.
Learn more
MEHSA3
MEHSA3 reduces MOSFET temperatures, lowers distortion, increases durability and prolongs the output device life span.
NOMAD is a "real time" analog computer that protects your amplifier from shorting speaker wires and ...
Learn more
NOMAD
NOMAD is a "real time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances.
(left-OLD | right-NEW)
Rockford Fosgate amps use custom TO-247 MOSFETs. These have 60% more ...
TO-247 MOSFETs
(left-OLD | right-NEW)
Rockford Fosgate amps use custom TO-247 MOSFETs. These have 60% more metal tab area for more power capacity, lower impedance and improved heat dissipation over traditional TO-220 MOSFETs found in competitor amps.
Power ratings on Rockford Fosgate amplifiers conform to CTA-2006 industry standards. These guidelines mean your amplifier's ...
Learn more
CTA-2006 Compliant
Power ratings on Rockford Fosgate amplifiers conform to CTA-2006 industry standards. These guidelines mean your amplifier's output power ratings are REAL POWER numbers, not inflated marketing ratings.
DSM utilize 1% tight-tolerances improving efficiency of the circuit, decreases cross-talk from other discrete components and ...
Learn more
DSM
DSM utilize 1% tight-tolerances improving efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature.
These Avatars are a personal signature from the Rockford Fosgate team member(s) who designed and engineered ...
Learn more
Engineered In The USA
These Avatars are a personal signature from the Rockford Fosgate team member(s) who designed and engineered this fanatic product. This statement illustrates our commitment to being Designed and Engineered in the U.S.A.
Differential inputs eliminate noise picked up by signal cables resulting in clean signal transfer.
Learn more
Differential Inputs
Differential inputs eliminate noise picked up by signal cables resulting in clean signal transfer.
(Sum of Rated Power)
(RMS Continuous Power)
150 Watts x 4 @ 2-Ohm
300 Watts x 2 @ 4-Ohm Bridged
2-Ohm x 2 Bridged Stable
(PVC/PowerCube®)
139 Watts x 2 @ 4-Ohms 0° Res
236 Watts x 2 @ 2-Ohms 0° Res
Rear Channels
140 Watts x 2 @ 4-Ohms 0° Res
236 Watts x 2 @ 2-Ohms 0° Res
64% @ 2-Ohm
2-Ohm: <1.0%
Rear Low level: 1 RCA pair
Input Switch: 2CH / 4CH
Treble: 0dB to +12dB @ 12kHz
Bass: 0dB to +18dB @ 45Hz
Rear Channels - Punch EQ
Treble: 0dB to +12dB @ 12kHz
Bass: 0dB to +18dB @ 45Hz
Front Low-Pass (LP): 50-500Hz 24dB/octave Butterworth
Rear High-Pass (HP): 50-500Hz 24dB/octave Butterworth
Rear Low-Pass (LP): 50-500Hz 24dB/octave Butterworth
(overrides rear channel built-in Punch EQ)
Thermal
Protect
(not included)
5.42 x 20.68 x 37.86 (cm)
Knowledge Base Articles
- Extended warranty on Rockford Fosgate amplifiers
- 2007 Power Series Amplifiers - Owner's Manual
- 2007 PEQ Punch EQ Remote Install
- 2007 PEQ Punch EQ - Product Advisory
- Using two PEQ bass knobs on a dual amp system - Product Advisory
- 2010 Power Multi-Channel Amplifiers - owner's manual
- RFI2SW & RFIF2SW Speaker Line To RCA Adapter - product advisory
Show all Knowledge Base topics
Ask Our Experts
Return Authorization
Contact the Authorized Rockford Fosgate Dealer you purchased this product from. If you need further assistance, call 1-800-669-9899 for Rockford Customer Service. You must obtain an RA# (Return Authorization number) to return any product to Rockford Fosgate. You are responsible for shipment of product to Rockford.
ARE YOU ENGINEERED TO ROCK?
Get a 1-Year extended amplifier warranty when using a matching Rockford Fosgate installation kit.
We want you to get the maximum performance and reliability from your Rockford Fosgate amplifier. We're so certain using the right cables make a difference, we'll give you and additional 1-Year amplifier warranty when using a matching installation kit!
- 1 Purchase a Rockford Fosgate Punch or Power amplifier.
- 2 Add the correct amplifier installation kit.
- 3 Get an additional 1 year amplifier warranty FREE!
Reviews
5 Star
I just recently bought this amplifier and left me speechless. Great amp , great sound quality , for those who don't own one. Highly recommend. Definitely best bang for the buck $$
5.0
Write a ReviewComplete Your System
Rockford Fosgate products are built to work together seamlessly for the ultimate experience.
+
Power 6.75" Series Component System
T1675-SThe T1675-S is a 6.75" 2-way component system with 1" fabric dome tweeters and is rated at 80 watts RMS. The system includes a pair of tweeters, two woofers with grilles, dedicated crossovers, and mounting hardware.
Power 6"X9" 2-Way Full-Range Speaker
T1692The T1692 is a 6”x9” 2-way full-range speaker rated at 100 Watts RMS designed as high-powered OEM replacement perfected for sound quality. Speakers include grilles, integrated concealed crossovers and mounting hardware.
Power 6"x9" 3-Way Full-Range Speaker
T1693The T1693 is a 6”x9” 3-way full-range speaker rated at 100 Watts RMS designed as high-powered OEM replacement perfected for sound quality. Speakers include grilles, integrated concealed crossovers and mounting hardware.
Power 6.50" Aluminum Component System
T2652-SThe T2652-S is a 6.50” 2-way component system featuring 1” aluminum dome tweeters and is rated at 100 Watts RMS. Kit includes pair or woofers with grilles, two tweeters with dedicated audiophile crossovers and mounting hardware.
Click to explore some of the products that work best.
-
T1675-S
-
T1692
-
T1693
-
T2652-S
Power 6.75" Series Component System
The T1675-S is a 6.75" 2-way component system with 1" fabric dome tweeters and is rated at 80 watts RMS. The system includes a pair of tweeters, two woofers with grilles, dedicated crossovers, and mounting hardware.
Power 6"X9" 2-Way Full-Range Speaker
The T1692 is a 6”x9” 2-way full-range speaker rated at 100 Watts RMS designed as high-powered OEM replacement perfected for sound quality. Speakers include grilles, integrated concealed crossovers and mounting hardware.
Power 6"x9" 3-Way Full-Range Speaker
The T1693 is a 6”x9” 3-way full-range speaker rated at 100 Watts RMS designed as high-powered OEM replacement perfected for sound quality. Speakers include grilles, integrated concealed crossovers and mounting hardware.
Power 6.50" Aluminum Component System
The T2652-S is a 6.50” 2-way component system featuring 1” aluminum dome tweeters and is rated at 100 Watts RMS. Kit includes pair or woofers with grilles, two tweeters with dedicated audiophile crossovers and mounting hardware.
Click to explore some of the products that work best.
T1675-S
T1692
T1693
T2652-S
Be first to hear about the latest products.
Sign up for product updates.