1000 Watt 4-Channel Amplifier T1000-4

1000 Watt 4-Channel Amplifier T1000-4

Read More
0 Reviews
Discontinued
Overview

Need a powerful amplifier to drive a 2-ohm stereo speaker system with a 4-ohm bridged/mono woofer load? This is the perfect amplifier for you, and with 1,000 watts divided between 4 channels, you will never run out of bass pumping power.

FEATURES AT A GLANCE

  • 2/4 channel input switch
  • 1/0 AWG power/ground connectors
  • MOSFET power supply
  • Audiophile grade speaker connections
  • 24dB/octave crossover
  • MOSFET output stage
  • Blue L.E.D. Simulated VU Signal Meters
  • RCA pass-thru outputs
  • 2-Year Warranty
Technologies
CTA-2006 Compliant

Power ratings on Rockford Fosgate amplifiers conform to CTA-2006 industry standards. These guidelines mean your amplifier's ...

Learn more
Engineered In The USA

These Avatars are a personal signature from the Rockford Fosgate team member(s) who designed and engineered ...

Learn more
DSM

DSM utilize 1% tight-tolerances improving efficiency of the circuit, decreases cross-talk from other discrete components and ...

Learn more
DTM

Dynamic Thermal Management evenly distributes excess heat across entire amplifier heatsink.

Learn more
MEHSA3

MEHSA3 reduces MOSFET temperatures, lowers distortion, increases durability and prolongs the output device life span.

Learn more
NOMAD

NOMAD is a "real time" analog computer that protects your amplifier from shorting speaker wires and ...

Learn more
Punch EQ2

Onboard equalizer with up to +18dB @ 45Hz and/or up to +12dB boost at 12kHz.

Learn more
TO-247 MOSFETs

(left-OLD | right-NEW)
Rockford Fosgate amps use custom TO-247 MOSFETs. These have 60% more ...

Learn more
TRANS•ana

Trans•ana is a Class A/B topology that simplifies the signal path of the amplifier allowing the ...

Learn more
Specifications
Cta-2006 Compliant
Number of Channels
4
Total Power
(Sum of Rated Power)
1000 Watts RMS
Rated Power
(RMS Continuous Power)
150 Watts x 4 @ 4-Ohm
250 Watts x 4 @ 2-Ohm
500 Watts x 2 @ 4-Ohm Bridged

STABLE @ 2-Ohm x 2 Bridged (reduced thermal time may occur)
Dynamic Power
(PVC/PowerCube®)
Front Channels:
222 Watts x 2 @ 4-Ohms 0° Res
390 Watts x 2 @ 2-Ohms 0° Res

Rear Channels:
223 Watts x 2 @ 4-Ohms 0° Res
387 Watts x 2 @ 2-Ohms 0° Res
Bridgeable
Yes
Frequency Response
20Hz to 20kHz +/-1dB
Input Sensitivity
150 mV to 4 V
Circuit Topology Class
Class A/B
Efficiency (average)
70% @ 4-Ohm
65% @ 2-Ohm
Total Harmonic Distortion (THD+Noise)
<1.0%
Signal Input
Front Channels:
1 RCA pair

Rear Channels:
1 RCA pair
Signal Output
1 RCA pair
Tone Controls
Front Channels:
Treble: 0dB to +12dB @ 12kHz
Bass: 0dB to +18dB @ 45Hz

Rear Channels:
Treble: 0dB to +12dB @ 12kHz
Bass: 0dB to +18dB @ 45Hz
Function depends upon crossover setting (LP/AP/HP)
Crossover Controls
Front Channels: High-Pass (HP): 50Hz-500Hz @ 24dB/octave Butterworth
Low-Pass (LP): 50Hz-500Hz @ 24dB/octave Butterworth

Rear Channels:
High-Pass (HP): 50Hz-500Hz @ 24dB/octave Butterworth
Low-Pass (LP): 50Hz-500Hz @ 24dB/octave Butterworth
Remote Controls
Optional Remote PEQ
(overrides rear channel built-in Punch EQ)
Visual Indicators
Power (Blue LED)
Thermal (Red LED)
Protect (Yellow LED)
Front Output -00dB to +2dB @ 11 steps (Blue LEDs)
Rear Output -00dB to +2dB @ 11 steps (Blue LEDs)
Power Wire Gauge
1/0 AWG
Power Input Connector
Block
Speaker Wire Gauge
8 AWG to 16 AWG
Speaker Output Connector
Block
Cooling
Convection
Heatsink
Operating Voltage
Recommended Fuse
(not included)
150 A
Average Current Draw (13.8V Music)
75 A
Max. Current Draw (13.8V Sinewave)
150 A
Suggested Alternator
Included In The Box
Dimensions (H x W x D)
2.14 x 8.14 x 21.875 (in)
5.44 x 20.68 x 55.66 (cm)
Shipping Weight
19.6 Lbs. (8.89 Kg.)
Compatibility
Support

Return Authorization

Contact the Authorized Rockford Fosgate Dealer you purchased this product from. If you need further assistance, call 1-800-669-9899 for Rockford Customer Service. You must obtain an RA# (Return Authorization number) to return any product to Rockford Fosgate. You are responsible for shipment of product to Rockford.


Accessories Wiring Wizard

Available Wiring Diagrams

Please consult your amplifier owner's manual for lowest recommended impedance.

This allows FRONT channels to run STEREO speakers while REAR channels run WOOFERS.



Wiring Diagram #1



Wiring Diagram #2



Wiring Diagram #3



Wiring Diagram #4



Wiring Diagram #5



Wiring Diagram #6



Wiring Diagram #7



Wiring Diagram #8



Wiring Diagram #9



Wiring Diagram #10

Speaker Polarity

Your woofer may use one of the following to identify (+/-) terminals.

Positive +

Red Post

Purple (4Ω)

Red (8Ω)

Negative -

Black Post

No Dot

No Dot

Speaker Polarity

Your woofer may use one of the following to identify (+/-) terminals.

Positive +

Red Post

Purple (4Ω)

Red (8Ω)

Negative -

Black Post

No Dot

No Dot

Reviews

Be the first to review this product.

No reviews yet

0 Reviews
Write a Review

Be first to hear about the latest products.

Sign up for product updates.