Punch 500 Watt 2-Channel Amplifier P500X2
Punch 500 Watt 2-Channel Amplifier P500X2
The Punch P500X2 is a 2-channel stereo amplifier capable of producing 250 Watts into each channel at 2-Ohms. The P500X2 amplifier is great with full-range or component systems or can be bridged for use with several subwoofers.
The P500X2 is an excellent way to PUNCH up your sound system without monopolizing your entire trunk - that way you have more room for subs! With its massive output stage, this amplifier is best suited for driving a pair of 8-ohm SVC subwoofers or four 2-ohm DVC subwoofers. Remember to utilize the recommended power and speaker cables to optimize power delivery.
FEATURES AT A GLANCE
- High level input capable with Auto Turn-On circuit
- RCA pass-thru outputs
- 12dB/octave Butterworth crossover
- Features C.L.E.A.N. Set-up
- Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
- On-board Punch EQ with +18dB boost @ 45Hz
- Cast aluminum heatsink
- Muted turn on
- Stealth top mounted control panel
- Short circuit protection
- Over current protection
- 1 Year Warranty
Power ratings on Rockford Fosgate amplifiers conform to CTA-2006 industry standards. These guidelines mean your amplifier's ...
Learn more
CTA-2006 Compliant
Power ratings on Rockford Fosgate amplifiers conform to CTA-2006 industry standards. These guidelines mean your amplifier's output power ratings are REAL POWER numbers, not inflated marketing ratings.
This product fulfills all essential safety and environmental requirements as defined in the European Directives (768/2008 ...
Learn more
CE Compliant
This product fulfills all essential safety and environmental requirements as defined in the European Directives (768/2008 EC).
Trans•ana is a Class A/B topology that simplifies the signal path of the amplifier allowing the ...
Learn more
TRANS•ana
Trans•ana is a Class A/B topology that simplifies the signal path of the amplifier allowing the signal to travel through the amplifier at a lower voltage. The result is greater reliability and exceptional sound quality.
Differential inputs eliminate noise picked up by signal cables.
Learn more
Balanced Differential Inputs
Differential inputs eliminate noise picked up by signal cables.
Dynamic Thermal Management evenly distributes excess heat across entire amplifier heatsink.
Learn more
DTM
Dynamic Thermal Management evenly distributes excess heat across entire amplifier heatsink.
DSM utilize 1% tight-tolerances improving efficiency of the circuit, decreases cross-talk from other discrete components and ...
Learn more
DSM
DSM utilize 1% tight-tolerances improving efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature.
MEHSA3 reduces MOSFET temperatures, lowers distortion, increases durability and prolongs the output device life span.
Learn more
MEHSA3
MEHSA3 reduces MOSFET temperatures, lowers distortion, increases durability and prolongs the output device life span.
NOMAD is a "real time" analog computer that protects your amplifier from shorting speaker wires and ...
Learn more
NOMAD
NOMAD is a "real time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances.
These Avatars are a personal signature from the Rockford Fosgate team member(s) who designed and engineered ...
Learn more
Engineered In The USA
These Avatars are a personal signature from the Rockford Fosgate team member(s) who designed and engineered this fanatic product. This statement illustrates our commitment to being Designed and Engineered in the U.S.A.
C.L.E.A.N. (Calibrated Level Eliminates Audible Noise) is a patented circuit with in/out clip LEDs to help ...
Learn more
C.L.E.A.N. Set-Up
C.L.E.A.N. (Calibrated Level Eliminates Audible Noise) is a patented circuit with in/out clip LEDs to help match a source to amp and optimize output.
(Sum of Rated Power)
(RMS Continuous Power)
250 Watts x 2 @ 2-Ohm
500 Watts x 1 @ 4-Ohm Bridged
(PVC/PowerCube®)
365 Watts x 2 @ 2-Ohms 0° Res
2-Ohm: <1.0%
Punch EQ2 Treble: 0dB to +12dB @ 12kHz
Function depends upon LP/AP/HP switch position
Low-Pass: 50Hz-250Hz @ 12dB/octave Butterworth
All-Pass: Yes
Input Clip LED3
Output Clip LED1,2,3
LED Color Legend:
1BLUE: <0.5% THD
2VIOLET: 1% THD
3RED: 10%+ THD
(not included)
6.05 x 19.71 x 33.73 (cm)
Knowledge Base Articles
- Extended warranty on Rockford Fosgate amplifiers
- 2013 Punch amplifiers - owner's manual
- 2013 Punch Level Control 2 - owner's manual
- C.L.E.A.N. set-up procedure to adjust amplifier gains
Show all Knowledge Base topics
Ask Our Experts
Return Authorization
Contact the Authorized Rockford Fosgate Dealer you purchased this product from. If you need further assistance, call 1-800-669-9899 for Rockford Customer Service. You must obtain an RA# (Return Authorization number) to return any product to Rockford Fosgate. You are responsible for shipment of product to Rockford.
ARE YOU ENGINEERED TO ROCK?
Get a 1-Year extended amplifier warranty when using a matching Rockford Fosgate installation kit.
We want you to get the maximum performance and reliability from your Rockford Fosgate amplifier. We're so certain using the right cables make a difference, we'll give you and additional 1-Year amplifier warranty when using a matching installation kit!
- 1 Purchase a Rockford Fosgate Punch or Power amplifier.
- 2 Add the correct amplifier installation kit.
- 3 Get an additional 1 year amplifier warranty FREE!
Complete Your System
Rockford Fosgate products are built to work together seamlessly for the ultimate experience.
+
Punch 6" Series Component System
P16-SThe P16-S is a 6" 2-way component system with 1" soft dome tweeters and is rated at 60 watts RMS. The system includes a pair of tweeters, two woofers with grilles, integrated crossovers, and mounting hardware.
Punch 12" P3 4-Ohm DVC Subwoofer
P3D4-12The P3D4-12 is the best performing Rockford Fosgate Punch series subwoofer for cars and trucks. The P3 12” features Dual 4-Ohm voice coils, 600 Watts RMS of power handling, and accommodates a grille insert using the included cast aluminum trim ring.
Punch 15" P3 4-Ohm DVC Subwoofer
P3D4-15The P3D4-15 is the best performing Rockford Fosgate Punch series subwoofer. The P3 15” features Dual 4-Ohm voice coils, 600 Watts RMS of power handling, and accommodates a grille insert using the included cast aluminum trim ring.
Click to explore some of the products that work best.
-
P16-S
-
P3D4-12
-
P3D4-15
Punch 6" Series Component System
The P16-S is a 6" 2-way component system with 1" soft dome tweeters and is rated at 60 watts RMS. The system includes a pair of tweeters, two woofers with grilles, integrated crossovers, and mounting hardware.
Punch 12" P3 4-Ohm DVC Subwoofer
The P3D4-12 is the best performing Rockford Fosgate Punch series subwoofer for cars and trucks. The P3 12” features Dual 4-Ohm voice coils, 600 Watts RMS of power handling, and accommodates a grille insert using the included cast aluminum trim ring.
Punch 15" P3 4-Ohm DVC Subwoofer
The P3D4-15 is the best performing Rockford Fosgate Punch series subwoofer. The P3 15” features Dual 4-Ohm voice coils, 600 Watts RMS of power handling, and accommodates a grille insert using the included cast aluminum trim ring.
Click to explore some of the products that work best.
P16-S
P3D4-12
P3D4-15
Be first to hear about the latest products.
Sign up for product updates.