Punch 1,000 Watt Class-bd 5-Channel Amplifier P1000X5

Amplifier Front View
Amplifier Back Side View
Amplifier Three Quarter Beauty Shot
Amplifier Right Side View
Amplifier Input and Output Side View
Amplifier Left Side View
Amplifier Top View
Amplifier Back Side Three Quarter Beauty Shot

Punch 1,000 Watt Class-bd 5-Channel Amplifier P1000X5

The Punch P1000X5 is an ultra-efficient 5-channel amplifier capable of running your entire system without excessive drain on your charging system. The P1000X5 is perfect for running a front/rear system and a dedicated subwoofer.

Read More
2 Reviews
Overview

The P1000X5 1,000 Watt full-range 5-channel is the one-and-only amplifier you will need to run your entire system. Run dash speakers off the front channels, run back speakers off the rear channels and run subwoofer(s) off the 5th channel! Known world-wide for brute power, this amplifier offers a higher level of efficiency along with a tri-stage protection that covers thermal, over-current and short circuits.

FEATURES AT A GLANCE

  • High level input capable with Auto Turn-On circuit
  • On-board Punch EQ with +18dB boost @ 45Hz
  • 12dB/octave Butterworth crossover
  • Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
  • Features C.L.E.A.N. Set-up
  • Muted turn on
  • Stealth top mounted control panel
  • Short circuit protection
  • Cast aluminum heatsink
  • Over current protection
  • 2/4 channel input switch
  • Infrasonic filter
  • 1 Year Warranty
Technologies
CTA-2006 Compliant

Power ratings on Rockford Fosgate amplifiers conform to CTA-2006 industry standards. These guidelines mean your amplifier's ...

Learn more
CE Compliant

This product fulfills all essential safety and environmental requirements as defined in the European Directives (768/2008 ...

Learn more
Class-BD

Class-BD amplifiers have 75-80% efficiency ratings vs. 20-60% efficiency ratings of traditional Class-A/B amplifiers.

Learn more
TRANS•ana

Trans•ana is a Class A/B topology that simplifies the signal path of the amplifier allowing the ...

Learn more
Balanced Differential Inputs

Differential inputs eliminate noise picked up by signal cables.

Learn more
DTM

Dynamic Thermal Management evenly distributes excess heat across entire amplifier heatsink.

Learn more
DSM

DSM utilize 1% tight-tolerances improving efficiency of the circuit, decreases cross-talk from other discrete components and ...

Learn more
MEHSA3

MEHSA3 reduces MOSFET temperatures, lowers distortion, increases durability and prolongs the output device life span.

Learn more
NOMAD

NOMAD is a "real time" analog computer that protects your amplifier from shorting speaker wires and ...

Learn more
C.L.E.A.N. Set-Up

C.L.E.A.N. (Calibrated Level Eliminates Audible Noise) is a patented circuit with in/out clip LEDs to help ...

Learn more
Engineered In The USA

These Avatars are a personal signature from the Rockford Fosgate team member(s) who designed and engineered ...

Learn more
Specifications
Cta-2006 Compliant
Number of Channels
5
Total Power
(Sum of Rated Power)
1000 Watts
Rated Power
(RMS Continuous Power)
75 Watts x 4 + 150 Watts x 1 @ 4Ω
125 Watts x 4 + 300 Watts x 1 @ 2Ω
N/A Watts x 4 + 500 Watts x 1 @ 1Ω
250 Watts x 2 + N/A Watts x 1 @ 4Ω Bridged
Dynamic Power
(PVC/PowerCube®)
115 Watts x 4 + 299 Watts x 1 @ 4Ω 0° Res
190 Watts x 4 + 540 Watts x 1 @ 2Ω 0° Res
N/A Watts x 4 + 863 Watts x 1 @ 1Ω 0° Res
380 Watts x 2 + N/A Watts x 1 @ 4Ω Bridged 0° Res
Bridgeable
Yes (front/rear channels)
Frequency Response
Front/Rear: 20Hz - 20kHz +/-3dB
Sub: 20Hz - 500Hz +/-3dB
Input Sensitivity
150 mV - 12 V
Circuit Topology Class
Class A/B + Class BD (Sub)
Efficiency (average)
Front/Rear: 66% @ 4-Ohm
Sub Channel: 80% @ 4-Ohm
Total Harmonic Distortion (THD+Noise)
<1.0%
Signal Input
Input Switch: Hi/Low level input
Input Switch: 2/4 channel input
Hi/Low Level: 3 RCA Pair
Sub: front/sub input switch
Signal Output
-
Tone Controls
Sub:
0dB to +18dB @ 45Hz
Crossover Controls
Front: 50Hz - 250Hz High-Pass @ 12dB/Octave
Rear: 50Hz - 250Hz High-Pass @ 12dB/Octave
Sub: 50Hz - 250Hz Low-Pass
Sub: 28Hz infrasonic filter @ 12dB/Octave
Remote Controls
Optional Punch Level Control (PLC2) Ready
Visual Indicators
Power/Protect/Thermal LED
Input Clip LED3
Output Clip LED1,2,3

LED Color Legend:
1BLUE: <0.5% THD
2VIOLET: 1% THD
3RED: 10%+ THD
Power Wire Gauge
4 AWG
Power Input Connector
Block
Speaker Wire Gauge
12 AWG
Speaker Output Connector
Block
Cooling
Convection
Heatsink
Operating Voltage
9 - 16 VDC
Recommended Fuse
(not included)
150 A
Average Current Draw (13.8V Music)
75 A
Max. Current Draw (13.8V Sinewave)
150 A
Suggested Alternator
100 A
Included In The Box
Dimensions (H x W x D)
2.38 x 7.76 x 15.03 (in)
6.05 x 19.71 x 38.18 (cm)
Shipping Weight
15.3 Lbs. (6.93 Kg.)
Compatibility
Support

Return Authorization

Contact the Authorized Rockford Fosgate Dealer you purchased this product from. If you need further assistance, call 1-800-669-9899 for Rockford Customer Service. You must obtain an RA# (Return Authorization number) to return any product to Rockford Fosgate. You are responsible for shipment of product to Rockford.


Accessories Wiring Wizard

Available Wiring Diagrams

Please consult your amplifier owner's manual for lowest recommended impedance.

The below diagrams configure the 5th CHANNEL for optimum SUBWOOFER power output.



Wiring Diagram #1



Wiring Diagram #2



Wiring Diagram #3



Wiring Diagram #4



Wiring Diagram #5



Wiring Diagram #6



Wiring Diagram #7



Wiring Diagram #8



Wiring Diagram #9



Wiring Diagram #10

Speaker Polarity

Your woofer may use one of the following to identify (+/-) terminals.

Positive +

Red Post

Purple (4Ω)

Red (8Ω)

Negative -

Black Post

No Dot

No Dot

Speaker Polarity

Your woofer may use one of the following to identify (+/-) terminals.

Positive +

Red Post

Purple (4Ω)

Red (8Ω)

Negative -

Black Post

No Dot

No Dot

Wiring Kits

ARE YOU ENGINEERED TO ROCK?

Get a 1-Year extended amplifier warranty when using a matching Rockford Fosgate installation kit.

We want you to get the maximum performance and reliability from your Rockford Fosgate amplifier. We're so certain using the right cables make a difference, we'll give you and additional 1-Year amplifier warranty when using a matching installation kit!

  • 1 Purchase a Rockford Fosgate Punch or Power amplifier.
  • 2 Add the correct amplifier installation kit.
  • 3 Get an additional 1 year amplifier warranty FREE!

Reviews

Powerful 5 Channel Amp

This amp is hooked up to 4 6x9 components with a 10" ported sub in my 2015 Jeep Cherokee.I sent Crutchfield back a 5 channel Kicker and Alpine amp because of their lack of what I was looking 4..More power!Without sacrificing the quality of sound.I am satisfied with the P1000X5! Ray K,Michigan.

Nice

I am satisfied with the P1000X5 with my toyota, Arfan from Indonesia

5.0

2 Reviews
Write a Review

Be first to hear about the latest products.

Sign up for product updates.